Sage Technologies

ST Family of Industrial Accelerometers

• Commonly Used in Semiconductor Fabrication Plants
• ST-686A-100
• ST-693T-10
• ST-693T-100
• ST-632-10

Introduction

Accelerometers sense vibration commonly found in most industrial machinery. Applications for acceleration and velocity sensors include machinery health monitoring of motors, fans, pumps, gearboxes, blowers, machine tool spindles, compressors, chillers, rollers, and mixers. Maintenance professionals use accelerometers for predictive maintenance to lower overall cost and increase machinery performance.

 Meggitt's extensive offering of Wilcoxon Research vibration sensors includes velocity sensors for machinery health monitoring, high frequency and low frequency accelerometers for high-speed and slow-speed monitoring, high temperature sensors for extreme environments, dual output sensors which measure vibration and temperature, and triaxial accelerometers which measure vibration along three axis. Meggit has the right Wilcoxon Research vibration sensors for every machinery health monitoring application.

 ST-686A-100 General Purpose

The ST-686A-100 should be used for general purpose applications and when temperature measurements are not required.

• 100 mV/G, Top Connector
• Hermetic Sealed
• Ground Isolated
• ESD Protection
• Reverse Wiring Protection
• EMI/RFI Shielded

 ST-693T-10 Dual Output

The ST-693T-10 or ST-693T-100 should be used if both vibration and temperature measurements are required. The ST-686T-10 is the 10 mV/G version while the ST-ST-686T-100 is 100 mV/G

• Dual Acceleration & Temperatur Sensing
• 10 mV/G, Top Connector
• Hermetic Sealed
• Ground Isolated
• ESD Protection
• Reverse Wiring Protection

 ST-632-10 High Frequency

The ST-632A-10 should be used if temperature measurements are not required and high frequency or high level capability is needed.

• 100 mV/G, Top Connector
• Hermetic Sealed
• Ground Isolated
• ESD Protection
• Reverse Wiring Protection
• EMI/RFI Shielded

 ST-693A-100 Dual Output

The ST-693T-10 or ST-693T-100 should be used if both vibration and temperature measurements are required. The ST-686T-10 is the 10 mV/G version while the ST-ST-686T-100 is 100 mV/G

• Dual Acceleration & Temperatur Sensing
• 100 mV/G, Top Connector
• Hermetic Sealed
• Ground Isolated
• ESD Protection
• Reverse Wiring Protection